Filter By:
- Parts & Accessories (65)
- Pedals (179)
- Show More Brands
- Show Fewer Brands
- Show More Model Years
- Show Fewer Model Years
Pedals

$6.50
The Curve Sole Measurement Tool works in conjunction with the flat sole shims to correct the radius of flat sole shoes and prevent unwanted squeaking. There are 4 radius measurements, one per side, that measure the sole and indicate whether a shim is needed or not.
$7.99
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.

$9.00
Dimension Nylon Basic Toe Straps
-Durable metal buckle
-Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel)
- 450mm

$9.99
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes.
- Sold in pairs

$9.99
Dimension Toe Straps.
- Durable metal buckle
- Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel)
- 440mm length

$9.99
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action.
- 2pcs IGUS self lubricating bushing
- 2pcs O-ring
- 2pcs stainless shim washer

$9.99
Longer rear load pins for the outer extremities of your pedals provide ultimate durability, while shorter front load center pins create a virtual concavity in the pin pattern, increasing grip without sacrificing pedal body thinness.
- 28pcs rear load pins
- 16pcs front load pins
- Tool included

$9.99
- Fits most platform pedals
- Two wooden riser blocks w/durable rubber band
- Adds 3/4" to each side (1-1/2" total)

$10.00
- Nylon construction
- Intended for use with double-strap toe straps (sold separately)
- Includes mounting hardware
- 36 grams per pair

$10.00
These 3mm stackers can easily correct the common issue of leg length inequality.
- External cleat lift for addressing leg length inequality.
- Shaped to fit SPD-SL, Look Keo, and Speedplay Zero pedals.
- Includes longer screws.
- Package includes two cleat stackers.

$11.00
Dimension Mini Toe Clips
- Toe clips do not accept toe straps
- Sold as a pair
- Mounting hardware for the toe-clip is included

$11.00
Dimension Toe Clips and Straps Set.
Includes:
- 4 bolts
- 4 nuts (washers included)
- 2 nylon toe straps
- 2 toe clips

$12.00
The Keo Spacer adaptors are slim wedges that fit between the shoe and the cleat. They aim to avoid the unpleasant creaking sound provoked by contact between the sole and the cleat, which can arise in particular with flat-soled shoes. Delivered with 2 spacers and 6 screws for quick and easy installation.

$12.75
Lightweight and durable, the plastic-composite body Empire flat pedal is your go to for any situation.
- Nylon composite body.
- Durable coated alloy cage.
- 9/16" steel axle.
- Smooth ball bearing internals.

$12.99
Dimension Junior Pedals.
- Molded nylon, 1-piece, caged-type pedals
- Built-in reflectors, will not accept toe clips
- Overall pedal size is 80 x 60mm
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Platform
- Spindle Material: Chromoly Steel
- Weight: 230g (9/16-inch); 304g (1/2-inch)

$13.99 - $19.99
Odyssey Twisted PC pedals-extremely simple, lightweight, inexpensive and famously durable plastic-bodied design.Often duplicated but never replicated.
- High-strength plastic composite

$14.00
Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.

$14.95
Cleat screws are intended for proper installation of the Cleat Wedge. Designed to withstand high torque levels, creating a secure and reliable connection between the rider and the bike. Available in different lengths and styles to fit most pedal systems.
- 10mm SPD/MTB compatible cleat screws
- 4mm Hex countersunk M5x0.8
- Compatible with most 2-hole cleats
- Black oxide-coated carbon steel
- 25 pieces

$14.99
Engineered to optimize the interface between the pedal and shoe for ultimate performance and power transfer.
The kit includes:
- 8 × 1mm traction pads
- 8 × 2mm traction pads
Compatible with:
- Mallet E
- Model years 2016 – present

$14.99
The Thermalite pedals feature a concave, low profile design and are molded with Thermalite nylon material.
- Micro knurling with 24 pins for traction
- Recessed end to prevent damage to bearing cover
- Chromoly spindle with 6mm broach and 15mm wrench flats
- Weight: 391g
- Pedal Body Material: Composite/Plastic

$15.99
- Shimano SPD-SL-style
- Engineered thermoplastic injection body
- Anti-slip walk pads
- Fixed position with no float

$16.00
Dimension City Pedals.
- Built-in reflectors, will not accept toe clips
- Molded nylon; 1-piece, caged-type pedal
- Slip-resistant surface

$16.00
Dimension Mountain Basic Pedals.
- Molded nylon 1-piece, caged-type pedal with reflectors
- Accepts toe clips
- Hang tag packaging
- Pedal Body Material: Plastic
- Pedal Spindle: 9/16-inch or 1/2-inch
- Pedal Type: Toe Clip Compatible
- Spindle Material: Chromoly Steel
- Weight: 330g

$16.99
The Dak pedals are the Dakota Roche signature model that feature 14 large hexagon molded pins on both sides for maximum grip.
- Slim profile
- Large surface area
- Heat treated 4130 spindle
- 9/16"

$17.00
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit.
- Includes 36 steel pins and 2mm spacers to replace both sides of two pedals
- The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.

$17.10 - $29.50
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$19.00
- Compatible with LOOK cleats system.
- 3 float options (0/4.5/9).
- Memory position for separate front and rear cleat.

$19.90
- Set of 44 total replacement steel pins for vault pedals
- Run threads-out for maximum traction or flip the pins to heads-out for less grip
- 16 Short pins (for use in the center) overall length 8.5mm, stud is 4.5mm
- 28 Long pins (for use in the outside edge) overall length 12.5mm, stud is 4.5mm
- Use either a 5mm spanner or the included 2mm hex wrench to secure/remove
Page 1 of 9
Next page