Parts & Accessories
Giant's AC Toe Clips and Straps includes two durable chrome-plated steel clips, mounting hardware and a pair of quality leather straps with chrome-plated steel buckles.
Giant's Giant Toe Straps are made of durable nylon with chrome-plated steel buckles. The ends of the buckles are rubber-tipped to be easy on your fingers when you're adjusting the strap tension on rides.
- Steel - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 50 grams per pair
- Nylon construction - Intended for use with double-strap toe straps (sold separately) - Includes mounting hardware - 36 grams per pair
- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.
Widen your Q-factor to 57mm. - Long spindles are 5mm longer than standard. - The kit includes: 1 pair long spindles + refresh kit (Enduro cartridge bearings, igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double shot, model years 2010-present - Weight: 112g per pair - Spindle material: forged SCM 435 chromoly steel - Q-factor: 57mm
Dimension Nylon Toe Clips. Included instructions account for toe strap installation, but straps must be purchased separately - Toe straps are NOT included - Sold as a pair
Authentic Ritchey replacement cleats for WCS Micro Road Pedals. Note: only Ritchey replacement cleats work with the Micro pedal. - Beveled cleat compatible with Ritchey WCS Micro pedals - Compatible with SPD style pedals
$11.99 - $13.99
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - 430mm length
Pre-cut traction tabs designed to integrate with the Highline remote lever and increase grip for ultimate control.
Protect the soles of your shoes with the Shoe Shields from Crank Brothers. These stainless-steel plates install under your cleats and prevent the pedal from digging in to your carbon-soled shoes. - Sold in pairs
- NJS/Keirin certified chrome plated steel clips for single toe strap - Hardware included
The ultimate weight-saving upgrade. - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
$29.00 - $30.00
Shimano's SPD-SL cleats are perfect for all your SPD-SL-compatible pedals. Available in three models to suit your ergonomic needs, with fixed/0-degree, 2-degree, and 6-degree options. These cleats come as a pair and include all required mounting hardware. They are compatible with three-bolt cycling shoes.
The Ergon TP1 Pedal Cleat Tool is the first tool for precisely and easily adjusting cycling shoes cleats. The ergonomically correct position of the feet on the pedals plays a crucial role in injury prevention and is also important for maximizing both performance and comfort.
- Tubular stainless steel cage clips for single toe strap
Dimension Mini Toe Clips - Toe clips do not accept toe straps - Sold as a pair - Mounting hardware for the toe-clip is included
Dimension Toe Clips and Straps Set. Includes: - 4 bolts - 4 nuts (washers included) - 2 nylon toe straps - 2 toe clips
The split-cleat system makes cleat swapping a snap – no need to worry about losing your cleat’s position. - Cleat Bolt Pattern: 3-Bolt - Cleat Compatibility: Pedal iSSi , Look KeO - Cleat bolts and washers included - 4mm hex wrench required to install
Replace or overhaul iSSi pedals with Triple Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. - Chromoly spindles - Three sealed cartridge bearings - Compatible ONLY with iSSi Triple Bearing pedal models: Flash III, Trail III & Flip III - Standard spindle length: 52.5mm - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench
- Leather laminate with non-stretch inner layer - Steel hardware - Intended for use with double-strap toe clips (sold separately) - 140 grams per pair - 420mm length
- Includes a pair of cleats and mounting hardware - Compatible with Ritchey Pro-V4 and V5 mountain clipless pedals - Mountain SPD compatible
Your pedals like to be pampered. The Crank Brothers Pedal Refresh Kit gives you everything you need to keep them happy. Pedal Refresh Kit includes: -Enduro catridge bearings - Igus LL-glide bearings - Double seal system (internal and external seals) - Hex alloy end caps - O-rings - Nuts - Sleeve bushings - Bearing removal tool Compatible with the following pedals (2010-present): - Eggbeaters - Candys - Mallets - 5050s
RaceFace Chester Pedal Pin Kit 20 Pins Black
Dimension Toe Straps. - Durable metal buckle - Multi-purpose strap can also be used as a lash strap for -bike touring or rear rack (caution: must be used to keep the strap tail out of the wheel) - Poly leather (vegan) toe strap - Velvet finish - 450mm length
A revolution in performance and reliability. The kit includes premium internal components: - Inner bearing o-ring x 2 - Spindle seal x 2 - Outer Igus solid bearing x 2 - Inner Igus solid bearing half x 4 - Bearing Retainer Bolt x 4 - Outer o-ring x 2 - Grease port screw x 2 - Compatibility: Stamp (2016), Stamp 7 (2017+), Stamp 11 (2017+)
$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
Dimension Nylon Basic Toe Straps -Durable metal buckle -Multi-purpose strap can also be used as a lash strap for bike touring or rear rack (caution must be used to keep the strap tail out of the wheel) - 450mm
Page 1 of 3 Next page