Accessories

Ride through winter in more comfort with the AmFIB® Lite Skull Cap. This cold-weather essential uses Polartec® Wind Pro® fabric on the leading edge to block the wind and highly breathable thermal fabric on the top and back to keep you from overheating. It’s designed to fit easily under your helmet and comes down enough on the sides for crucial ear protection. It fits comfortably under a helmet and a port in the rear allows ponytails to pass through. FEATURES: - Pedal to Zero™: Going by bike 3mi / 5km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex

More fun, less sun. With increased UPF coverage and better durability, these updated sleeves give you up to UPF 50 even when stretched by 30 percent, delivering longer-lasting sun protection so you can safely pedal at the brightest times of day.  - In–R–Cool technology to provide optimal skin-cooling effect and moisture management when you perspire - ELITE Transfer fabric with UPF 50+ sun protection and Ice-fil - BioViz reflective elements for low-light visibility - Easy slip-on fit - 93% polyester  7% elastane - Technology: Ice-fil

No winter riding kit is complete without the proper headwear. The AmFIB® Lite Balaclava will help you conquer the cold with technical fabrics and thoughtful cycling features. Polartec® Wind Pro® fabric on the leading edge blocks the wind, while the highly breathable thermal fabric on the top and back keeps you from overheating. The hinged face covering is easy to pull down for eating and drinking, or to dump a little heat while climbing. It fits comfortably under a helmet and a ponytail port in the rear adds to the appeal of this full-featured balaclava. FEATURES: - Pedal to Zero™: Going by bike 5mi / 7km offsets the climate impact of this garment - Polartec® Wind Pro® fabric on the front provides protection where you need it most - Thermal fabric on the top and back ensures the right amount of breathability - Made with recycled materials - Hinged face covering is easy to pull down when needed - Rear port for ponytails FABRIC: - Main Body: 79% recycled polyester, 21% spandex Front Panel: 97% polyester, 3% spandex

Arm warmers are likely the most essential cool weather cycling accessory, and for much of year you won't leave home without them either on or in your pockets. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in damp conditions. A BioViz logo near the elbow adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding PI Dry technology for all-weather performance - Anatomic left- and right-specific fit - Plush, wide elastic binding with silicone gripper for a stay-up fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Imported

Transform any pair of cycling shorts into a knicker with these super-versatile knee warmers. A general rule is to keep knees covered up to 60 degrees, which means these warmers could see action all year long. Our latest warmers feature a new, softer Thermal fleece fabric with improved stretch, which makes both fit and comfort exceptional. But our PI Dry technology is what really sets these warmers apart, offering permanent water-shedding performance for more warmth in wet conditions. A BioViz logo on the back of the calf adds reflectivity in low-light conditions. - Thermal fleece fabric with water-shedding - PI Dry technology for all-weather performance made with anatomic construction eliminates bunching through your full range of motion - Plush, wide elastic binding with silicone gripper for a stay-up fit - Anatomic left- and right-specific fit - BioViz reflective elements for low-light visibility - Unisex sizing - 56% recycled nylon, 30% polyester, 14% Lycra elastane - Made in Vietnam

Reach for this shoe cover on those cold days when you're not taking no for an answer. This is our very warmest shoe cover, thanks to three-layer AmFIB softshell fabric and a quilted lining with 100g Primaloft Gold with Crosscore technology. Plus, a durable water-repellent (DWR) finish keeps your feet dry through most conditions. Our anatomic design eliminates the bunching that can happen near the top of the pedal stroke, and the patented two-stage hook-and-loop closure makes them easy to put on and take off, solving one of the most frustrating parts of using shoe covers. - AmFIB Softshell provides superior wind and water protection - 100g Primaloft Gold w/Crosscore technology insulation is made from 35% post-consumer recycled polyester and incorporates Aerogel particles for incredible warmth with minimal weight - Patented two-stage hook-and-loop closure provides both sleek fit and easy on and off - Anatomic paneling for a performance fit - BioViz reflective elements for low-light visibility - Main Body: 37% polyurethane, 33% polyester, 20% polyamide, 10% CORDURA - Lining: 100% polyamide - Made in Vietnam

The perfect hat to wear while wrenching on your bike. Black with an adjustable back strap with woven patch and embroidered Park Tool logo. - Mid profile fit. - One size fits all.

Mid-profile fit ball cap made of blue cotton with snapback closure. Embroidered front logo and Park Tool woven patch on back.

Upgrade your mechanic uniform with this fashionable 6-panel flat bill hat, featuring an embroidered "It's a Great Day to Fix a Bike" hexagonal patch. 100% cotton 6-panel. - Standard size: 58 cm circumference - Extra large size: 61 cm circumference

- Made of 100% Polyester - UV resistant outer layer - Water resistant - Designed to be used with glasses - Dust filter mid layer - Antibacterial sweat absorbent inner layer - Can be reused up to 20 times

- Made of 100% Polyester - UV- and water-resistant outer layer - Dust filter mid-layer - Antibacterial sweat-absorbent inner layer - Designed to be used with glasses - Reuse/wash up to 20 times - These are neither N95-certified nor FDA-approved

- Flat peak 5 panel construction - 100% cotton - Webbing/buckle rear adjuster - One size - Embroidered Logo

This reflective yellow leg band with adjustable hook and loop closure secures loose pant legs to prevent chain catching. - Reliable hook and loop closure system works both wet and dry - Reflective yellow material for additional visibility - 1.25-inch width

This wide, adjustable leg band with adjustable hook and loop closure secures loose pant legs and prevents them from catching in the chain. - Reflective striping for additional visibility - Reliable hook and loop closure system works both wet and dry - Flexible material stretches for additional comfort - 2 3/8-inch width

- Wind-resistant/water-resistant - Insulation for warmth - Reflective logo

- TransTextura™ sweatband absorbs excess moisture - Lightweight mesh fabric fits easily under helmet

- Matching with Beliv Kit. - Traditional four panel design. - Elastic band for a superb fit across a range of sizes. - 100% Cotton.

- Traditional four-panel design - Elastic band for a superb fit across a range of sizes - Fabric: 100% cotton

Liv's Midthermal Arm Warmers are great for cold rides, breezy descents, and unexpected weather. They're made from warm and soft brushed fabric that transfers moisture, breathes easily, and dries quickly. Reflective details at the wrist offer enhanced visibility when rides go long and the light starts to recede. - Liv RACE FIT - Flatlock seams - High-visibility reflective accents - ThermTextura fabric

Liv's Mid-Thermal Knee Warmers are great for cool days and variable weather conditions. Made from fleece-lined ThermTextura fabric that protects you from the elements, these warmers also feature flatlock seams that provide amazing next-to-skin comfort. The race fit means they'll stay secure against your legs, and they have reflective accents for enhanced visibility. - Liv RACE FIT - Flatlock seams - High-visibility reflective accents - ThermTextura fabric

- Patented Halo Sweat Block Seal channels Sweat away from eyes and face - Dryline fabric absorbs Sweat - one size fits all - Made in the U.S.A.

Make sure your gear is working for you during your next aero event. Giant's Aero Shoe Covers help smooth airflow over your feet and reduce drag. Stretchy Lycra covers with sublimated graphics and a back zipper closure make it easy to get these covers over your shoes.

Whether on the podium or just hanging out, this snapback is a real winner. It's also a great sun blocker during golden hour with a pliable bill and snap adjustment you can shape your own victories in style. FEATURES: - 100% Chino Cotton - Adjustable Snapback Closure - Vintage Rope & Patch Design

- ThermTextura fabric - 3D ergonomic fit - Silicone gel gripper

- ProTextura PLUS Wind and water proof material with critical seams taped - ThermTextura functionality due to the properties of neoprene - Medial locking side zipper with Velcro closure - Wear-proof bottom piece - Reflective details for additional visibility

For cold and blustery mornings with a chance of rain, Diversion Arm Warmers give you a lightweight, water repellent and wind resistant solution easily stashed in your jersey if things warm up. Constructed with an aerodynamic 3D ergonomic cut using water repellent and wind proof ProTextura 4-way stretch fabric, silicone gel grippers keep them secure while reflective detailing offers improved visibility in low light conditions. An essential for any cyclist's locker in changeable spring and autumn conditions, team them up with the Giant Diversion Short Sleeve Jersey for the ultimate cycling outer layer. Features - ProTextura fabric is waterproof, windproof and highly breathable in key exposure areas - ThermTextura fabric on the inside keeps you warm while wicking moisture to keep you dry - 3D ergonomic fit - Silicone gel gripper - Reflective accents

Keep the cold at bay with Louis Garneau's mid-weight Matrix 2.0 Neck Warmer. The seamless multi-zone construction offers breathability and protection where needed, and the high-precision knitting results in a thin, stretchable product. It's perfect for any cool- or cold-weather activity.

A little thicker than a traditional headband, yet small enough to still fit under your helmet comfortably, this Wind Headband is the perfectly balanced accessory to provide a little extra warmth for your ears and head during the winter. Ear and forehead coverage keeps you from being uncomfortable while riding but still lets heat escape out of the top of your head to prevent overheating.

A little thicker than a traditional skull cap, yet small enough to still fit under your helmet, the Winter Skull Cap is the perfectly balanced head cover to provide serious heat savings during the cold winter months. - Fabric: Supra WindDry – 4-way stretch 3-ply softshell with breathable, windproof and warmth properties - Garment Feature Accessories: Ponytail opening at the back - Visibility Features: Reflective logo

Louis Garneau's Arm Warmers 2 are crafted from Garneau's HeatMaxx nylon/spandex material with soft brushed insides for optimal moisture transfer and heat retention. You'll also appreciate the comfy flatlock seams, bicep grippers to keep them in place, UPF 50 sun protection, and reflective accents for enhanced visibility. And, when you warm up, these warmers are easily stashed in a pocket or pack.